
TOMI Environmental Solutions
​
The iHP™ Process
(Ionized Hydrogen Peroxide)
​
​
Binary Ionization Technology (BIT), a patented two-step process that activates and ionizes a 7.8% Hydrogen Peroxide (H2O2) sole active ingredient based solution into a fine mist/fog known as ionized Hydrogen Peroxide (iHP). Unlike many of TOMI's competitors, Hydrogen Peroxide is not the efficient kill, instead the proper application and decontamination of iHP contains a high concentration of Reactive Oxygen Species (ROS), consisting mostly of hydroxyl radicals (OH) is the killing agent. OH are one of the most powerful oxidizing agents in nature, and during TOMI’s iHP process, kills bacteria and fungal spores and inactivates viral cells by destroying their proteins, carbohydrates, and lipids. This leads to the cellular disruption and/or dysfunction allowing for the quick decontamination of targeted areas, objects and large spaces.
​
The uniqueness of TOMI's Plasma Science technology is that it takes an OH, previously known to only live milliseconds and transfers it from "point A to point B" in the area or space expecting an efficient decontamination. Keeping the OH active, resulting in the destruction of the cell wall of bacterial spores within seconds.
The atmospheric cold plasma arc converts the H2O2 molecules into ROS, mainly the OH. While a large percentage of the H2O2 is converted, some escapes the arc and is present in the ambient air. The small escaping amount of H2O2 in the ambient environment being treated with SteraMist makes it possible to “smell the clean”, but the plasma science behind the TOMI SteraMist technology and sprayers may allow for a six log kill to the area/space being decontaminated- innovating for a safer world.
Refer to Binary Ionized Technology (BIT) Safety Data Sheet (SDS/MSDS) here.

The Plasma Science Behind the Technology

The Plasma Science Behind the Technology

The Plasma Science Behind the Technology

The Plasma Science Behind the Technology
Hover your cursor over the photo to see info.
Click the photo of your choice to see more.
Or choose from the selection below
TOMI Environmental Solutions Products
Scroll down for to see options for using SteraMist in your facility.
STERAPAK™ Surface Units
Scroll down for STERAPAK & Surface Unit
TOMI Environmental Solutions
SteraMist™ STERAPAK Unit
Hand Held, Point and Spray Misting Disinfection System


The SteraMist Surface Unit is a fully portable, back pack style, hand-held, point and spray misting disinfection unit.
​
-
Cordless and Compact
-
Simply spray surfaces for 5 seconds per square foot for disinfection
-
Non-corrosive application for superior material compatibility
-
Can be used on hard, non-porous, high touch surfaces
-
Reaches surfaces and areas that regular disinfectants cannot reach
-
Log six kill efficacy
​
​
SteraMist™ Surface Unit
TOMI Environmental Solutions
SteraMist™ Surface Unit
Hand Held, Point and Spray Misting Disinfection System


The SteraMist Surface Unit is a fully portable, hand-held, point and spray misting disinfection unit.
-
Simply spray surfaces for 5 seconds per square foot for disinfection
-
Multiple Surface Units can reduce terminal clean rooms to 10 minutes
-
Can be used on hard, non-porous, high touch surfaces
-
​Reaches surfaces and areas that regular disinfectants cannot reach
​
​
SteraMist™ NX+
TOMI Environmental Solutions
SteraMist™ NX+
Easy to Maneuver Room to Room Disinfection System

Introducing the NV+, a cutting-edge disinfection system designed to revolutionize your approach to full room fogging. As the demand for effective and efficient room decontamination solutions grows, the NV+ stands out by utilizing ionized hydrogen peroxide fogging technology. Just set it in the middle of your room, enter the dimensions, and begin.
​
-
Full room decontamination
-
Comprehensive reporting
-
Meets strict GxP standards
-
Easy to use and requires minimum effort
-
Easily implement complete decontamination into your daily routine with the NV+ system.
SteraMist™ Environmental System
TOMI Environmental Solutions
SteraMist™ Environment System
Complete Room Spray Misting Disinfection System


The SteraMist Environment System is transportable, automated, remote controlled and provides complete room decontamination using three (3) applicators per system.
-
Effective whole room treatment in just under 45 minutes including application time and contact time
-
Less time is typically needed for smaller sized rooms
-
Fully transportable
-
Application is not a vapor
-
Can be used on hard, non-porous, high touch surfaces
-
​Reaches surfaces and areas that regular disinfectants cannot reach
​
​
SteraMist™ Custom Options
TOMI Environmental Solutions
SteraMist™ Custom Options
Customized Spray Misting Disinfection System

Seamlessly incorporate SteraMist iHP decontamination technology into your enclosures, ensuring compliance with strict regulations and delivering consistent six-log results. Integrate into isolators, chambers, passthroughs, material transfer, aseptic and fill-finish manufacturing, and more. Explore various options tailored to your requirements and budget, all while ensuring the same advantages of low hydrogen peroxide, iHP decontamination technology.

For a facility with unique requirements, SteraMist BIT may be permanently incorporated to any volume of space to achieve area decontamination.
-
Fully automated with downloadable data
-
Customized for unique spaces and areas
-
H2O2 converted by plasma science
-
Product performance supported by GLP efficacy data
TOMI Environmental Solutions
SteraMist™ Validation
​
SteraMist BIT is Fully Validated to Comply with Good Manufacturing Practices (cGMP) and Good Laboratory Practice (cGLP) Environments
A TOMI technician is available to work through many decontamination validation processes. Validate a 6-log kill with one or more of the following methods TOMI has to offer! TOMI’s experts can assist in every step, from a simple validation technique to a Pharmaceutical’s Qualification: requirement of Design Qualification (DQ), Installation Qualification (IQ), Operational Qualification (OQ) and erformance Qualification (PQ).
​
TOMI recommends the efficacy of the SteraMist technology to be empirically tested using Chemical Indicators (CIs), Biological Indicators (BIs), and/or Enzyme Indicators (EIs) to ensure a 6-log kill.
​
​
​

TOMI Environmental Solutions
​
SteraMist Advantages
​
-
Classified Only as an Irritant!
-
No mixing required
-
No special clean up
-
No rinse
-
No wipe
-
No residue
-
No hazardous DOT restriction for transportation
-
No special storage requirements
-
Six-Log Kill (99.9999%) on Clostridium difficile spores.
-
Kills pathogenic bacteria and Deodorizes by killing odor causing bacteria.
-
Less down time than competing technologies.
-
Fully validated to comply with GMP (Good Manufacturing Practice) Standards.
-
iHP fog kills and inactivates bacteria and viruses in even the most hard-to-reach areas.
​
Refer to Binary Ionized Technology (BIT) Safety Data Sheet (SDS/MSDS) here.
